Bathtub Forming Machine manufacturers Vacuum forming equipment is a type of forming machine., Vacuum forming equipment can form plastic into various shapes by Using heat and vacuum pressure. The process involves heating plastic sheet until soft and then draping it over a mould. Then the vacuum system suck the sheet into the mould. finally the sheet is removed from the mould. 聽 NameVacuum forming equipment ConditionNew Plastic typeABS锛宎crylic Forming area2000*1600mm Sheet thickness1.8-5mm Core ComponentsMotor,gear, pump Heating Power28kw Controlmanual operation control Heating zone16 zones(can be controlled separately to save the electric power) Power Supply220v or 380v Quality assurance1 year UsageBathtub, shower tray, wall panel forming 聽 THE VACUUM FORMING PROCESS 聽 ---Clamping The sheet is placed on the steel frame and fixed it. ---Heating Heat the sheet with temperature range 120-180鈩?it must be heated evenly throughout its thick.If the melted sheet slightly fall down, so air must be injected to lift it up. ---Bubble The melted sheet stretches and is ready to go into the mold. Make sure that the thickness is even across the entire surface. ---Vacuum This process is vacuum forming, a suction force is applied to form the desired shape. ---Cooling and Remove